A café that buys barista tools wholesale is not shopping for two tampers and a spare knock box. On this catalogue the minimum is 10 units of each variant you pick. That number is larger than a two-group bar puts on the counter on opening day, and it should shape the first purchase order. Discount terms and planning prices updated 16 November 2026.
The notes below are for a café that already has an espresso machine, or is about to install one. Yozcoffee does not sell commercial espresso machines or shop grinders. It does sell the tools that sit next to them: tampers, dosing funnels, puck screens, knock boxes, scales and the cleaning cloths that wear out first. The list below follows the path of one shot, then turns that list into quantities the catalogue will accept.
If you also need pitchers, cups or brewers specified before you write to us, use How to Buy Coffee Accessories Wholesale. The sections below stay on the espresso station.
Follow the shot, not the category menu
Opening-day checklists usually start with the machine and the grinder, then drop “tamper, knock box, scale” into a short bullet list. That is a useful reminder and a thin buying plan. The sequence that matters on the bar is the sequence of the shot: dose into the basket, keep the grounds in the basket, distribute and tamp, cover the puck if you use a screen, extract and weigh, knock the puck out, then wipe down.
A first wholesale order should cover those steps before it covers a second handle colour, a second tamper style or a large wooden station you have not measured for. Milk pitchers belong on the same request if most of the menu is milk drinks. They are a separate sizing decision and should not stall the espresso-prep lines.
The five tools that earn a place on the first order
The prices in the table are the listed catalogue figures: 40 percent off the listed retail price on 10–49 units of a variant, and 40 percent off on 10–49 units. Fifty or more units of the same variant is a volume-pricing request. Listed prices exclude delivery. Two cafés ordering “the same tamper” can still receive different quotes if the size, handle, quantity or destination differs. The quote confirms the final amount, availability and shipping.
| Catalogue item | Listed options | Listed retail | 10–49 units |
|---|---|---|---|
| Impact Espresso Tamper | 51 mm, 53 mm or 58.5 mm; flat or threaded base; black or black-walnut handle | $49.99 | $29.99 |
| Magnetic dosing funnel | 51 mm, 53 mm or 58 mm, listed in silver | $19.99 | $11.99 |
| Dual-layer puck screen | 51 mm, 53 mm or 58.35 mm; 0.8 mm mesh | $19.99 | $11.99 |
| Espresso knock box, 450 ml | Black, orange or olive green; listing says it fits 58 mm portafilters | $19.99 | $11.99 |
| Digital coffee scale with timer | 2 kg / 0.1 g; black or white; USB-C | $39.99 | $23.99 |
| Barista cleaning cloths, 3-pack | 40 × 40 cm waffle weave; dark gray or light gray | $19.99 | $11.99 |
Fifty or more units of any of those variants is quoted separately, not taken from a published third tier.
A tamper matched to the basket, not the machine name
The Impact Espresso Tamper is the main café tamper in the catalogue. It is spring-loaded and self-leveling, with a rim-resting flange and a 304 stainless steel base. You choose a handle (black aluminum or black walnut), a base size (51 mm, 53 mm or 58.5 mm) and a base style (flat or threaded). Each combination is its own variant. “Ten tampers mixed across sizes and handles” does not meet the minimum. Ten of Black / 58.5 mm / Flat does.
Most commercial machines are sold as “58 mm.” That label names a group or portafilter family. It is not a measured instruction for the tamper. A compiled reading of manufacturer specs shows VST calling for a 58.40 mm flat tamper on its precision baskets, IMS listing 58 / 58.4 mm on its B70 baskets, and Decent Espresso cutting its own bases at 58.35 mm. Decent advises against 58.5 mm, because a very close fit can lift the puck when you raise the tamper. Motta’s size FAQ gives the practical rule: measure the inside diameter of the basket, then pick the closest base.
This catalogue’s Impact Tamper uses 58.5 mm for that family, not 58 mm and not 58.35 mm. If your baskets are VST or IMS and the maker’s figure is 58.4 mm, check the fit before you make 58.5 mm the house size, or ask us to look at it when you send the request. This catalogue does not list a 54 mm tamper. For Breville and Sage Bambino or Barista Express machines it lists a 53 mm 2-in-1 tamper and WDT tool, and a separate 54 mm dosing cup for those portafilters. Those two numbers sit side by side on purpose. Do not substitute a 51 mm or 58.5 mm Impact Tamper for them.
A magnetic dosing funnel in the same family
The magnetic dosing funnel is a 304 stainless steel ring, listed in silver at 51 mm, 53 mm or 58 mm. It sits on the portafilter so grounds land in the basket instead of on the bench. Plenty of opening checklists still mark dosing funnels as optional. On a busy bar they keep coffee in the basket instead of on the bench and around the grinder. The size label here is 58 mm, next to a 58.5 mm tamper and a 58.35 mm screen. Those three figures belong to the same family. They are not the same measurement. Pair them after you have measured the basket, not after you have matched the words on the boxes.
A puck screen you can replace without stopping service
The dual-layer puck screen is 0.8 mm thick, in 304 stainless steel mesh, listed at 51 mm, 53 mm or 58.35 mm. Screens wear, bend and disappear into the knock box. That is why they belong on a first bulk order even if only two groups are live on opening day. The extras sit in the drawer as replacements. There is also a thicker 2-pack at 1.2 mm, labelled 51 mm, 53 mm or 58 mm, if you prefer that build and a round 58 mm size name.
A screen has to drop in and lift out without force. If a 58.35 mm screen binds in your basket, say so on the request rather than assuming the next label down will fix it.
A knock box within reach of each barista
The 450 ml knock box has a removable rubber-coated bar, a non-slip base, and a listing that says it fits 58 mm portafilters. It comes in black, orange or olive green. Sharing one box across two groups looks tidy on a spreadsheet. During the morning rush it means reaching across another person with a hot, dirty portafilter. Plan on one box in reach of each barista, then use the rest of the ten-unit minimum as backups, a training station, or stock for a second site.
If your portafilters are 51 mm or 53 mm, do not assume this 450 ml model is the right opening item. The catalogue has other knock boxes, including smaller bins and stations with a built-in knock compartment. Write the portafilter size on the request.
A 0.1 g scale with a timer
Dose and yield both need a number. Barista Supplies’ café setup checklist tells new shops to buy a scale that reads to 0.1 g; that is the figure worth following. The digital coffee scale reads to 0.1 g up to 2 kg (4.4 lb), has automatic espresso and pour-over modes, and charges over USB-C. It is listed in black or white. Ten scales is more than one café parks beside the groups. The extras cover a pour-over corner, a training bar, a backup when a battery dies mid-service, or a second location.
How the 10-unit minimum changes the first café order
A two-group café might want two tampers, two funnels, two or three screens in rotation, two knock boxes and two scales on the bar, plus a couple of spares. That is a sensible operating count. It is not an order this catalogue can ship, because the minimum is 10 per variant.
Treat the extra units as a spare pool:
- Backups for the tools that get dropped or walk off the bench
- A training bar or a staff-drink station
- A second café or a catering setup you already know you will open
- Replacement screens and cloths, which actually get used up
Do not invent a second handle colour just to “use up” the minimum. Black / 58.5 mm / Flat and Black Walnut / 58.5 mm / Flat are two variants. Ordering five of each does not qualify. Ordering ten of each means twenty tampers and two separate tier counts.
Colours remain separate variants, each requiring at least 10 units. Ten black knock boxes plus ten orange knock boxes and twenty black knock boxes all use the same 40% discount; the unit price is unchanged throughout 10–49 units per variant.
The 40% discount applies equally at 10–49 units of each variant. Order the quantity you can use; twenty units do not unlock another discount. Ten packs of barista cleaning cloths contain 30 cloths and twenty packs contain 60. Keep spare-stock needs in mind when choosing quantities.
You can mix products in one enquiry. Ten tampers, ten funnels and ten knock boxes can travel on the same request. Each line still needs its own minimum of 10.
Kits versus buying the station piece by piece
The catalogue also sells matched prep kits in 51 mm, 53 mm or 58 mm. None of them uses the Impact Tamper’s 58.5 mm base, and none includes the 2 kg scale or the 450 ml knock box.
| Option | What the listing includes | Listed sizes | Listed price, 10–49 units |
|---|---|---|---|
| 4-piece espresso preparation kit | Spring-loaded tamper, WDT tool with holder, dosing funnel, silicone mat | 51 mm, 53 mm or 58 mm | $29.99 |
| 6-piece espresso tamper set | Walnut spring-loaded tamper, 8-needle WDT tool with stand, distributor, funnel, mat, puck screen | 51 mm, 53 mm or 58 mm | $47.99 |
| 9-piece espresso tool set | Tamping station with a size-matched tamper, WDT tool, distributor, funnel and screen | 51 mm, 53 mm or 58 mm | $71.99 |
| The five tools above, bought separately | Impact Tamper, magnetic funnel, 0.8 mm screen, 450 ml knock box, 2 kg scale | Mixed labels: 58.5 mm, 58 mm and 58.35 mm in the 58 mm family | $89.95 listed, before delivery |
If your baskets take a labelled 58 mm base, the 4-piece kit at $29.99 listed (10–49 units) costs the same as one Impact Tamper and adds a WDT tool, a funnel and a mat. That is the better buy when you are happy with a spring-loaded kit tamper in 51, 53 or 58 mm.
If you specifically want the Impact Tamper’s 58.5 mm base and rim-resting flange, buy that tamper as its own line and add the funnel, screen, knock box and scale beside it. The kits will not stand in for that size.
A worked first order for a two-group bar on 58 mm baskets
The example below assumes the café has measured its baskets and chosen the Impact Tamper’s 58.5 mm flat base, the 58 mm funnel, the 58.35 mm screen, the 450 ml knock box in black, the black scale and dark-gray cloths. Every line is 10 units, the published minimum. The figures are listed catalogue prices before delivery.
| Line | Variant to request | Qty | Listed unit price | Listed line total |
|---|---|---|---|---|
| Impact Espresso Tamper (YC-TMP-0013) | Black / 58.5 mm / Flat (YC-TMP-0013-05) | 10 | $29.99 | $299.90 |
| Magnetic dosing funnel (YC-EDF-0001) | Silver / 58mm (YC-EDF-0001-03) | 10 | $11.99 | $119.90 |
| Dual-layer puck screen (YC-EPS-0001) | 58.35 mm (YC-EPS-0001-03) | 10 | $11.99 | $119.90 |
| Espresso knock box, 450 ml (YC-KNB-0004) | Black (YC-KNB-0004-01) | 10 | $11.99 | $119.90 |
| Digital coffee scale with timer (YC-SCL-0003) | Black (YC-SCL-0003-01) | 10 | $23.99 | $239.90 |
| Barista cleaning cloths, 3-pack (YC-CCC-0001) | Dark Gray (YC-CCC-0001-01) | 10 | $11.99 | $119.90 |
Listed merchandise total, before delivery: $1,019.40 for 60 pieces across six variants. What a two-group bar actually puts on the counter on opening day might be two tampers, two funnels, two or three screens, two knock boxes, two scales and a few cloth packs. The rest of each ten-unit line becomes the spare pool. If the same owner is opening two cafés with the same basket size, the same request covers both rooms without changing a quantity.
Add milk pitchers to the same request if the menu needs them. The 450 ml stainless pitcher is the single mid-volume jug when you do not want two capacities on day one. It is listed in six colours, and each colour is its own 10-unit line.
If a training bar uses Breville or Sage 54 mm portafilters, keep those tools on separate lines. Do not fold them into the 58.5 mm tamper count.
What can wait until the next request
- A second tamper style or a second handle finish. Each one restarts the 10-unit count.
- Large tamping stations, until you have measured the bench and decided whether the knock box already covers that space.
- Portafilters, until you have confirmed the group-head fit. Ear spacing and cam shape are machine-specific; a 58 mm basket diameter is not enough information.
- Extra cup colours and retail gift sets. Those are a different buying problem.
- Commercial espresso machines, shop grinders and airpots. This catalogue does not sell them.
Group-head brushes and portafilter brushes can ride along if you already know the group size, listed as 51 mm or 58 mm on those items. They are not what should delay a first espresso-station order.
How to send the request so it can be quoted
Open the wholesale catalogue, choose the exact variant for each line, and set the quantity to at least 10. You can mix products. Then send the request from the wholesale form. Include:
- Company name and a business email
- Delivery country, so we can check delivery and whether DDP applies to that destination
- Each product, variant and quantity, written out. Example: Impact Espresso Tamper, Black / 58.5 mm / Flat, 10
- The basket size you measured, if you want us to look at a fit question
- An optional purpose: Café / Business Use, Resale, Corporate Gifts or Private Label
- Packaging or branding notes, if you selected Private Label. Custom logo and branded packaging orders start at 100 units. Product-specific requirements, options, pricing and lead times are confirmed in your quote.
We reply within one business day with pricing, availability and delivery. Adding items to the quote list does not place an order. Payment terms are confirmed in the quote, not at a checkout page. The catalogue page notes 60-day returns and a 12-month warranty; ask us to confirm how those terms apply to the wholesale order you are requesting.
Questions that change the order
Do I have to buy 10 tampers if I only have one two-group machine?
Yes, if that tamper variant is on the request. The minimum is 10 units per variant, not 10 units per café and not 10 units across the whole order. Plan the extras as spares rather than shrinking a line below 10.
Can I mix a 58.5 mm tamper with a 58 mm funnel and a 58.35 mm screen?
Those are the labels this catalogue uses inside the same nominal 58 mm family. They are different products, so they do not share a quantity count. Whether they fit your baskets depends on the baskets, not on the family name. Measure first, or send the basket maker and model with the request.
Do the listed prices include shipping?
No. Listed catalogue prices exclude delivery. The quote adds availability and shipping, including DDP on supported destinations, and that combined figure is the one to put on a purchase order.
Request a wholesale quote
List the exact variants and quantities, add the delivery country, and send a wholesale quote request. We reply within one business day with a quote you can put in front of a purchasing manager.
